FREZITE General Catalogue | Catalogue Général

42 WWW . F R E Z I T E . C O M D B b d Z NL/TK Ref. 150 3,2 2,2 30 24 863.150.024.30 3,2 2,2 30 36 863.150.036.30 3,2 2,2 30 48 863.150.048.30 # 180 3,2 2,2 30 30 863.180.030.30 3,2 2,2 30 42 863.180.042.30 3,2 2,2 30 56 863.180.056.30 # 200 3,2 2,2 30 36 NL30 863.200.036.30 3,2 2,2 30 48 NL30 863.200.048.30 3,2 2,2 30 60 NL30 863.200.060.30 # A B C B C 20º 0.2 A B C D B b d Z Ref. 254 3,2 2,2 15,875 50 862.254.050.15 305 3,2 2,2 25,4 60 862.305.060.26 862 863 Universal circular saw blades Lames de scie universelles Continued next page - Suite page suivante Combination saw blades Combination lames de scie Application: For rip and crosscuts. The deep gullets allow for deeper cuts and improved chip clearance. Machine: For sliding table saw machines, table saws, vertical panel sizing machines, etc. Technical information: With alternate top bevel + triple chip (HW). Application: For longitudinal and cross cutting of softwood and hardwood, dry, uncoated wood based material. Machine: For sliding table saw machines, table saws, portable machines, etc. Technical information: With alternate top bevel grinded carbide teeth (HW). Application: Pour coupe de bois en bout, en long et en travers. L’évidement entre dentures permet une coupe plus profonde et une évacuation des coupeaux optimisés. Machine: Pour scie à format, scie à table, etc. Technical information: Lame de scie avec denture alternée + trapèze (HW). Application: Pour coupe en long et en travers de bois (tendres et durs), dérivés du bois sans revê- tements, pour application de coupe universelle. Machine: Pour scie à format, scies à table, machines portatives. Caractéristiques techniques: Lame de scie à denture alternée en carbure (HW).

RkJQdWJsaXNoZXIy NDkzNTY=